As you can see if you look real closely....spin lines. I should have sanded the panels thoroughly before painting!
After sanding with 60 grit then 220 grit....
After thoroughly wiped down, I used Duplicolor Etching primer and let it dry for one hour.
I then used two coats of Rustoleum Filler Primer, to smooth anything I might have missed. You can find this primer at Wal-Mart's automotive department.
I'm going to let this dry for 4 hours then make sure the edges are smooth, sanding/filing as necessary. Tomorrow, we'll hit the pieces with the Krider Blue formula again.
